Heatseal Insulation specialises in a full range of sprayable energy saving coatings and damp-proof course replacements
What is Stormdry?
Stormdry is a colourless breathable, water-repellent
treatment for brick, concrete and stone walls. It is supplied in the form of a deeply penetrating cream that is applied to the wall surface using a roller or brush. Once Stormdry has been applied to the wall surface in a single coat and will permeate deeply before curing to form a water-repellent barrier for a BBA approved 25 years.
BS EN ISO Tested
Effective on a range of substrates
Enhancing water resistance for 25 years Stormdry has been tested to EN ISO15148:2002 (E), demonstrating its effectiveness on concrete, mortar, brick, and sandstone.
Maintain the Natural Appearance of Your Walls Breathable, Colourless Protection Stormdry masonry protection cream is applied to masonry in a single coat by means of brush, roller, or spray. Once applied, it penetrates deeply into the masonry before curing to form a colourless, breathable water repellent barrier.
So why do it?
- Protecting against penetrating damp (rain penetration)
- Improving the thermal resistance of masonry by keeping it dry – verified by the Energy Saving Trust
- Improving the performance of cavity wall insulation by protecting it from moisture
- Improving flood resistance of masonry
Up to 25-Year Durability
Up to 25-Year durability Approved by the British Board of Agrément (BBA) Certificate Number 15/5198 Stormdry is the only colourless masonry water repellent treatment that carries BBA approval. After extensive testing to determine continued water-repellency after aggressive freeze-thaw and UV exposure, the BBA issued a certificate with the following durability statement: the product will remain effective as a masonry water repellent for up to 25 years.”
SecoFLEX
What is SecoFLEX?
SecoFlex is a coloured wall coating that is 100% breathable, waterproof and has full elasticity to bridge permanent cracks and fissures. The coating can be matched to the colour of your property with our colour chart with a range of 200+ SecoFLEX waterproof wall coating can prolong the lifetime of buildings to a significant extent. In fact, we are so confident in our product that we provide a 10 year guarantee. External walls which have a SecoFLEX wall coating will be protected from early aging, damage from air borne pollutions and water penetration for many years.
Why do it?
SecoFLEX is 100% waterproof and 400% elastomeric and due to it’s unique formulation, the coating will not peel, crack or flake – Even in hot or cold temperatures. The unique wall coatings are also specifically designed to get the best out of different systems. In this way, the combination of different binding agents ensure a homogeneous product that repels water, is waterproof and is permeable to water vapour. The plasticising agents present in the wall coatings also does NOT give blisters, hairline cracks and distortions a chance to develop. Finally, the sophisticated formula of pigments and fillers provide optimal protection against discolouration even in the darker shades.
What is Dryrod?
Dryrod Damp-Proofing Rods are the next generation
treatment for rising damp. They provide a higher level of
performance and quicker installation speed than any other rising damp treatment currently available. Dryrods are 12 mm diameter, 180 mm length, fibre rods that contain a powerful water repellent. The patented, and BBA-approved, Dryrod delivery system ensures the correct dose of active ingredient is delivered to the wall every time, permanently eradicating rising damp. Bricks and mortar can be very porous and contain many fine capillaries, through which water can rise. The groundwater that rises up through the wall often contains salts that can contaminate plaster and cause lasting decorative spoilage. An effective damp proof course can prevent rising damp and eradicate if from your home.
What it does
The active ingredient contained within the rods spreads through, and bonds with, sand; cement mortar. Any continuous mortar line that has been properly treated with Dryrod Damp-Proofing Rods becomes a damp-proof course. Due to the unique formulation of active ingredient allowed by the design of the rods, a Dryrod treatment is over 4 times more effective than the next best treatment method.
Why do it?
Naturally, homeowners want the most effective products available to be used to treat rising damp in their properties. Creating the best possible barrier to rising damp minimises moisture in the wall, blocks the build-up of ground salts, and reduces heat-loss. For this reason, Dryrod Damp-Proofing Rods have been designed to form an effective DPC in walls of all types and have been tested under conditions of up to 95% saturation, where it has been shown to outperform all tested competitor products.
